Workwear & Outerwear

Size chart for workwear sets
	size	M(165)	L(170)	XL(175)	XXL(180)	3XL(185)	4XL(190)	5XL(195)	6XL(200)
tops	Clothing length	74	75	76	77	78	79	80	81
	bust	116	120	124	128	132	136	140	144
	Sleeve length	76	77	78	79	80	81	82	83
trousers	the waist	54	58	62	66	70	74	78	82
	Pants length	98	100	100	102	104	106	108	110
	hipline	116	120	124	128	132	136	140	144

TZ001/TZ002/TZ003/TZ004 size
Protective clothing model：TZ001/TZ002/TZ003/TZ004 size
size	155	S(160)	M(165)	L(170)	XL(175)	XXL(180)	3XL(185)	4XL(190)	5XL(195)	Gear difference	tolerance
Clothing length	68	70	72	74	76	78	80	82	84	2	±1
bust	108	112	116	120	124	128	132	136	140	4	±1
Sleeve length	56	57	58	59	60	61	62	63	64	1	±0.5
Cuff cuffs	25	26	27	28	29	30	31	32	33	1	±0.2
Shoulder width	44	45.5	47	48.5	50	51.5	53	54.5	56	1.5	±0.5
neck	43	43	44	44	45	45	46	46	47	1	±0.5
the waist	80	84	88	92	96	100	104	108	112	4	±1
rise	29	30	31	32	33	34	35	36	37	1	±0.5
Pants length	100	100	102	104	106	108	110	112	114	2	±1
hipline	100	104	108	112	116	120	124	128	132	4	±1
Pant cuffs	43	44	45	46	47	48	49	50	51	1	±0.2
height		160-165	165-170	170-173	173-176	176-180	180-185	185-190	188-195
weight		110-120	120-130	130-150	150-170	170-180	180-190	184-200	190-220

Size Table 2
Protective clothing model：TZ006/009/163/163X/166/167/168/169/2066/2067/2068/191/TZ13/005/007/007X/TZS13/TZS16X/15-3/160/195/15-8-9/194/193/181
Polyester cotton tooling model：DM13-7A-9A/DM153/DM154/DM155/DM160/DM190/DM001/DM002/DM906/DM921/DM922/DM925/DM2081
Cotton workwear model：QM161/QM168/Q170/QM171/QM1510/QM2091/QM2112
Cowboy clothing model：NZ010A/011/019/023/024/026/030/097A/098A/172A/2091/315/316/2018
size	155	S(160)	M(165)	L(170)	XL(175)	XXL(180)	3XL(185)	4XL(190)	5XL(195)	Gear difference	tolerance
Clothing length	66	68	70	72	74	76	78	80	82	2	±1
bust	106	110	114	118	122	126	130	134	138	4	±1
Sleeve length	56	57	58	59	60	61	62	63	64	1	±0.5
Cuff cuffs	23	24	25	26	27	28	29	30	31	1	±0.2
Shoulder width	43.5	45	46.5	48	49.5	51	52.5	54	55.5	1.5	±0.5
neck	43	43	43	44	44	44	45	45	46	1	±0.5
the waist	80	84	88	92	96	100	104	108	112	4	±1
rise	28	29	30	31	32	33	34	35	36	1	±0.5
Pants length	96	98	100	102	104	106	108	110	112	2	±1
hipline	98	102	106	110	114	118	122	126	130	4	±1
Pant cuffs	42	43	44	45	46	47	48	49	50	1	±0.2
height		160-165	165-170	170-173	173-176	176-180	180-185	185-190	188-195
weight		100-110	110-120	120-130	130-150	150-170	170-180	180-190	184-200

Size Table 3
Special safety protective clothing series：TZ163D/166D/2066D
Cotton series：QM1408/1409/161X/2112D
Cowboy series：NZ172/097/098/
Polyester cotton series：DM13-7-9/935D/151/154D/155D/160D
size	155	S(160)	M(165)	L(170)	XL(175)	XXL(180)	3XL(185)	4XL(190)	5XL(195)	Gear difference	tolerance
Clothing length	64	66	68	70	72	74	76	78	80	2	±1
bust	104	108	112	116	120	124	128	132	136	4	±1
Sleeve length	55	56	57	58	59	60	61	62	63	1	±0.5
Cuff cuffs	23	24	25	26	27	28	29	30	31	1	±0.2
Shoulder width	42.5	44	45.5	47	48.5	50	51.5	53	54.5	1.5	±0.5
neck	42	42	42	43	43	43	44	44	44	1	±0.5
the waist	76	80	84	88	92	96	100	104	108	4	±1
rise	28	29	30	31	32	33	34	35	36	37	±0.5
Pants length	98	98	100	102	104	106	108	110	112	2	±1
hipline	98	102	106	110	114	118	122	126	130	4	±1
Pant cuffs	42	43	44	45	46	47	48	49	50	1	±0.2
Sleeve length	23	24	24	25	25	26	26	27	27	1	±0.5
Cuff cuffs	39	40	41	42	43	44	45	46	47	1	±0.2
height		155-163	159-167	165-173	169-178	173-184	178-188	189-190	185-195
weight		95-108	105-118	117-135	130-152	150-170	165-185	175-195	185-205

Medium length cotton clothing size
Protective clothing model：TZ163M/TZM13-13/TZM13-15/TZ2066M
Polyester cotton tooling model：DM13-11/DM157/DM13-10ZC/DM13-12-1-2
size	155	S(160)	M(165)	L(170)	XL(175)	XXL(180)	3XL(185)	4XL(190)	5XL(195)	Gear difference	tolerance
Clothing length	71	74	77	80	83	86	89	92	95	3	±1
bust	104	116	120	124	128	132	136	140	144	4	±1
Sleeve length	60	61	62	63	64	65	66	67	68	1	±0.5
Cuff cuffs	32	33	34	35	36	37	38	39	40	1	±0.2
Shoulder width	46	47.5	49	50.5	52	53.5	55	56.5	58	1.5	±0.5
neck	45	45	45	46	46	46	47	47	47	1	±0.5
height		155-160	160-168	165-172	170-178	176-183	182-188	185-193
weight		85-95	100-120	120-140	135-155	155-175	175-190	185-200

Jacket size
size	S(160)	M(165)	L(170)	XL(175)	XXL(180)	3XL(185)	4XL(190)	5XL(195)	Gear difference	tolerance
Clothing length	68	70	72	74	76	78	80	82	2	±1
bust	106	110	114	118	122	126	130	134	4	±1
Sleeve length	71	73	75	77	79	81	83	85	2	±0.5
Bottom hem	102	106	110	114	118	122	126	130	4	±1
Shoulder width	42	43.5	45	46.5	48	49.5	51	52.5	1.5	±0.5
height	160-165	165-170	170-173	173-176	176-180	180-185	185-190	188-195
weight	100-110	110-120	120-130	130-150	150-170	170-180	180-190	184-200

NOTE: If your chest and/or waist measurements falls between sizes, buy the larger size.
Please check the product description of the Workwear you are ordering to determine the fit.

How to
Measure

For best results, measure over your undergarments.

Chest:
Measure just under arms and across shoulder blades holding the tape firm and level. If your chest falls between sizes, order the next size up.

Waist:
Measure around your natural waistline, keeping the tape comfortably loose.

Inseam:
Measure pants that will fit you well. Lay them flat, with the front and back creased smooth. Measure along the inseam from crotch to bottom of leg hem. Or, if you don't have pants that fit comfortably, measure from your crotch to your desired pant length.

Tall Sizes:
Our Tall sizes are two inches longer in the length and sleeve than our Regular size garments.

Regular, Short & Tall Sizes

If your body measurement is:	You should order this size:
Height	Recommended Length of Garment	Length of Coverall Inseam
5'3" to 5'7"	Short*	28
5'7" to 5'11"	Regular	30
5'11" to 6'3"	Tall	32

*Available in coveralls only

Differences between Regular & Tall Sizing:

Outerwear, Long-Sleeve Workwear
— Tall sizes are 2" longer than Regular sizes
— Tall sleeve lengths are 2" longer than Regular sleeve lengths.

Coveralls:
— Tall sizes are 1" longer than Regular sizes.
— Tall sleeve lengths are 1" longer than regular sleeve lengths.
— Short sleeve lengths are 1" shorter than Regular sleeve lengths.

Pants

	Small	Medium	Large	X-Large	2X-Large	3X-Large	4X-Large
	S	M	L	XL	2XL	3XL	4XL
Waist Measurement All Pants	28-30	31-34	35-38	39-42	43-46	47-50	51-54

Measure

For best results, measure over your undergarments.

Chest:
Measure just under arms and across shoulder blades holding the tape firm and level. If your chest falls between sizes, order the next size up.

Waist:
Measure around your natural waistline, keeping the tape comfortably loose.

Tall Sizes:
Our Tall sizes are two inches longer in the length and sleeve than our Regular size garments.

If your normal inseam preference is:		You should order this size:
Inseam Measurement		Overall Inseam Measurement
27-28		28
29-30		30
31-32		32
33-34		34
35-36		36

NOTE: If your inseam length falls between sizes, buy the longer size.

Overalls

coverall size 1
Protective clothing model：TZ161/TZ162/NZ015/CD219/DM218/QM217
size	155	S(160)	M(165)	L(170)	XL(175)	XXL(180)	3XL(185)	4XL(190)	5XL(195)	Gear difference	tolerance
Clothing length	48	50	52	54	56	58	60	62	64	2	±1
bust	106	110	114	118	122	126	130	134	138	4	±1
Sleeve length	57	58	59	60	61	62	63	64	65	1	±0.5
Cuff cuffs	25	26	27	28	29	30	31	32	33	1	±0.2
Shoulder width	44	45.5	47	48.5	50	51.5	53	54.5	56	1.5	±0.5
neck	45	45	46	46	46	47	47	47	47	1	±0.5
the waist	76	80	84	88	92	96	100	104	108	4	±1
rise	27	27.5	28	28.5	29	29.5	30	30.5	31	0.5	±0.5
Pants length	98	100	102	104	106	108	110	112	114	2	±1
hipline	104	108	112	116	120	124	128	132	136	4	±1
Pant cuffs	42	43	44	45	46	47	48	49	50	1	±0.2
height		155-160	160-165	165-170	170-175	175-180	180-185	185-190
weight		80-105	105-125	120-145	135-160	150-175	160-185	175-205

Hooded jumpsuit size table 2
size	S(160)	M(165)	L(170)	XL(175)	XXL(180)	3XL(185)	4XL(190)	5XL(195)	6XL(200)
Clothing length	148	150	152	154	158	162	167	172	177
bust	112	116	120	124	128	132	136	140	144
Sleeve length	75	76	77	78	79	80	81	82	83
hipline	112	116	120	124	128	132	136	140	144

NOTE: If your waist measurement falls between sizes, buy the larger size.

COVERALLS

Coat size chart
size	S(160)	M(165)	L(170)	XL(175)	XXL(180)	3XL(185)	4XL(190)	5XL(195)
Clothing length	74	78	82	87.5	93	98.5	104	109.5
bust	113	117	121	125	129	133	137	141
Sleeve length	74	75	76	77	78	79	80	81

Coat size chart2
Protective clothing model：TZ010/TZ012
size	155	S(160)	M(165)	L(170)	XL(175)	XXL(180)	3XL(185)	4XL(190)	5XL(195)	Gear difference	tolerance
Clothing length	88	91	94	97	100	103	106	109	112	3	±1
bust	104	108	112	116	120	124	128	132	136	4	±1
Sleeve length	56	57	58	59	60	61	62	63	64	1	±0.5
Cuff cuffs	30	31	32	33	34	35	36	37	38	1	±0.2
Shoulder width	46	47.5	49	50.5	52	53.5	55	56.5	58	1.5	±0.5
neck	39	39	39	40	40	40	41	41	41	1	±0.5
height		155-160	163-168	168-173	173-176	176-180	178-185	178-190
weight		85-95	100-120	115-135	135-155	155-170	170-185	175-190

NOTE: If your waist measurement falls between sizes, buy the larger size.

How to
Measure

For best results, measure over your undergarments.

Chest:
Measure just under arms and across shoulder blades holding the tape firm and level. If your chest falls between sizes, order the next size up.

Waist:
Measure around your natural waistline, keeping the tape comfortably loose.

Regular, Short & Tall Sizes

If your body measurement is:	You should order this size:
Height	Recommended Length of Garment	Length of Coverall Inseam
5'3" to 5'7"	Short*	28
5'7" to 5'11"	Regular	30
5'11" to 6'3"	Tall	32

*Available in coveralls only

Differences between Regular & Tall Sizing:

OUTERWEAR, LONG-SLEEVE Workwear, AND SWEATS
- Tall sizes are 2" longer than Regular sizes
- Tall long-sleeve lengths are 2" longer than Regular sleeve lengths.
- Tall short-sleeve lengths are ½" longer than Regular sleeve lengths
Also applies to Coverall

COVERALLS:
- Tall sizes are 1" longer than Regular sizes.
- Tall sleeve lengths are 1" longer than regular sleeve lengths.
- Short sleeve lengths are 1" shorter than Regular sleeve lengths.

Safety shoes Sizing Information

Sock Size	Show Size (Men)	Show Size (Women)
Small	-	4 - 5½
Medium	5 - 8½	6 - 8½
Large	9 - 11½	9 - 12
X-Large	12- 15	-

Packaging Details:		carton
Selling Units:		Single item
Single package size:		60X40X5 cm
Single gross weight:		1.200 kg

Workwear & Outerwear

How to Measure

Regular, Short & Tall Sizes

Safety shoes Sizing Information

How to
Measure