Name: High temperature resistant protective clothing, fire-resistant safety clothing
Item number: HL-001-A
Material combination: divided into two types: composite aluminum foil fireproof cloth, comfort layer, and composite aluminum foil fireproof cloth, flame-retardant insulation felt, and comfort layer; Fabric layer: 1. High reflective aluminum foil; 2. High temperature resistant adhesive; 3. Aramid fiber; 4. Comfort layer.
Composition: The entire outfit includes a top, overalls, hood, gloves, and foot protection (insulated shoes are provided separately)
Characteristics: Flame retardant, heat-insulating, anti radiation heat resistant, wear-resistant, folding resistant, and resistant to splashing of small amounts of high-temperature objects.
Thermal insulation principle analysis: Thermal insulation clothing is used to insulate radiation and cannot directly contact a fire source, as the surface is made of reflective aluminum foil that is not resistant to friction with rough or sharp objects.
Main temperature resistance performance:
Can reflect less than 90% of radiant heat
When approaching a high temperature of 300 ° C, it can last for 1 hour; when reaching a high temperature of 500 ° C, it can last for 30 minutes; when the temperature is 800 ° C and 1.75m away from the fire source, the surface temperature inside the clothing should not exceed 25 ° C for 2 minutes, and it can instantly approach a high temperature environment of 1000 ° C
Anti radiation heat penetration performance: The main parameter is that the time for the inner surface temperature to rise to 24C is 68.2s.
Flame retardant performance: The length of damage is 50mm in the longitudinal direction and 55mm in the transverse direction, with a continuous burning time of 0s and no melting or dripping phenomenon.
※ Peel strength: 31N/30mm in the warp direction, 13N/30mm in the weft direction ※ Breaking strength: 2011N in the warp direction, 1500N in the weft direction ※ Hydrostatic pressure resistance: Hydrostatic pressure resistance>20KPa.
※ High temperature resistance performance of hard accessories: maintain their original function after 5 minutes at a temperature of 260 ℃.
Flame and radiation heat protection performance: TP>33.3cal/cm2.
Scope of application: Protective clothing worn in industries such as petroleum, chemical, metallurgical, glass, and kiln for situations involving tempered iron splashing and high temperatures.
Caution: Damaged and detached aluminum foil is strictly prohibited from use! Check once a week!
The maintenance methods for high-temperature insulation clothing mainly include the following aspects:
Cleaning and maintenance after use: After each use, a soft brush dipped in neutral detergent should be used to wash away residual dirt on the surface, and then rinsed clean with water. After washing, let it air dry naturally in a well ventilated area. It is strictly prohibited to soak or hammer the complete set of fire insulation clothing in water. It must be kept dry and stored in a ventilated and dry place to prevent moisture, mold, or contamination that may cause the composite layer to peel off.
Regular inspection and maintenance: An inspection should be conducted once a week, with a focus on checking whether the outer layer and insulation layer of the insulation suit are damaged or disconnected. Especially for the aluminum foil part, if there is any damage, it should be repaired or replaced in a timely manner.
Correct storage method: Unused insulation clothing should be stored in its factory packaging and placed on wooden boards or shelves to prevent moisture. Used thermal insulation clothing must be cleaned and dried before storage. If conditions permit, it can be stored in a hanging form, avoiding contact with hard and sharp objects to prevent scratching and damage.
Avoid contact with chemicals: If the insulation suit has come into contact with chemicals or if bubbles are found, the entire aluminum plated surface should be cleaned. If there is residual oil or grease, it should be cleaned with neutral soap. Avoid contact with high temperature, open flames, and acidic chemical solvents to ensure the performance of the insulation suit is not affected.
By using the above maintenance methods, the service life of high-temperature insulation clothing can be extended and its performance can be ensured without being affected.
As a leading manufacturer of workwear and protective equipment in China. Our company can provide customers with different types of Workwear. You can choose styles directly from our website. In addition, if you have customized style design drawings, we can provide OEM service for you.
Back to Top
+8617333938700